PSS_Seals

PSS Shaft Seals

What makes the PSS shaft different and Why is it recognised as the best on the market?

	*High Density Carbon/Graphite Flange*
	*Double O-Rings*
	*Stainless Steel Rotor*
	*Nitrile below with Kevlar*
	*Double Hose Clamps*
	*Double Allen Head Screws*

How do I order a seal?1234


	You need to know the speed of the boat. There are two models of seals. The STANDARD seal is for boats up to 12 knots maximum speed. The HIGH SPEED seal, is for boats whose speed is above 12 knots.
	You need to know the shaft diameter exactly. As an example, 50mm is NOT 2 inches.
	You need to know the "log", or stern tube diameter.
	The seal comes with complete easy to read fitting instructions or we can fit it for you.

Click here to see installation instructions

[ Home ] [ Up ] [ PSS_Seals ] [ Bearing Specs ] [ Winches ]

Rogers & Lough Marine Engineers
82 Taylor Street, Bulimba,
Brisbane, Qld, 4171, Australia
Ph.: +61 7 3399 3433
Fax: +61 7 3399 3211
Email Rogers and Lough

Site developed by Hazzard Communications

High Density Carbon/Graphite Flange

Double O-Rings

Stainless Steel Rotor

Nitrile below with Kevlar

Double Hose Clamps

Double Allen Head Screws